Engine Types

Inline-6 Engines: What They Are and Why They're So Smooth

What an inline-6 engine is, why its six-in-a-row layout is naturally balanced, how it compares with a V6, and which cars and trucks still use one today.

On this page
  1. What “inline-6” means
  2. How an inline-6 is laid out
  3. Why inline-6 engines are so smooth
  4. The downsides: length, height and crankshaft twist
  5. Inline-6 vs V6
  6. Why the inline-6 faded and why it came back
  7. Well-known inline-6 engines
  8. Inline-6 questions

What “inline-6” means

An inline-6 is a piston engine with six cylinders arranged in a single straight row, all driving one crankshaft. It is also called a straight-six, and is often abbreviated I6 or L6. All of these names describe the same layout.

The inline-6 has a reputation as one of the smoothest engine layouts there is. That is not marketing: it follows from the way the six pistons move in relation to each other. This article explains how, along with the layout’s drawbacks and why it is making a comeback. For an overview of other layouts, see our guide to the types of car engines.

How an inline-6 is laid out

An inline-6 has:

  • One cylinder block with six bores in a row
  • One cylinder head on top, carrying the valves and, in most modern engines, two camshafts
  • One crankshaft with six crank throws (the offset journals that the connecting rods attach to)
  • One intake side and one exhaust side, which keeps the plumbing relatively simple

The crank throws are arranged in three pairs set 120 degrees apart. Cylinders 1 and 6 share one position, 2 and 5 another, and 3 and 4 the third. A common firing order is 1-5-3-6-2-4, which spreads the power pulses along the length of the engine.

Why inline-6 engines are so smooth

Every piston engine shakes to some degree because heavy pistons and connecting rods are constantly speeding up, stopping and reversing. How much of that shaking escapes into the car depends on whether the forces from different cylinders cancel each other out. The inline-6 is unusual because nearly all of them do.

Balanced forces

Engineers talk about two main kinds of shaking force:

  • Primary forces repeat once per crankshaft revolution. They come mainly from the pistons moving up and down.
  • Secondary forces repeat twice per revolution. They exist because a piston moves faster in the top half of its stroke than in the bottom half, due to the angle of the connecting rod.

In an inline-6, the three pairs of pistons are spaced evenly around the crankshaft. At any moment, the forces from one pair are offset by the other two, at both the primary and the secondary level. The result is that an inline-6 is considered to have essentially perfect primary and secondary balance without needing balance shafts.

An inline-four, by contrast, has balanced primary forces but unbalanced secondary forces, which is why larger four-cylinder engines often use balance shafts. An inline-three has its own rocking vibration, covered in our article on three-cylinder engines.

No rocking couple

Even when the up-and-down forces cancel, an engine can still rock end to end if the forces at the front and back are out of step. This is called a rocking couple.

An inline-6 is effectively two inline-threes placed back to back as mirror images. The front three cylinders move as a mirror of the rear three, so any tendency of the front half to rock is cancelled by the rear half. That mirror symmetry is the key reason the inline-6 is smoother than most other six-cylinder layouts.

Evenly spaced power pulses

In a four-stroke engine, each cylinder fires once every two crankshaft revolutions, or 720 degrees. With six cylinders, a power stroke arrives every 120 degrees. That overlapping, evenly spaced sequence gives a smooth flow of torque and the characteristic silky sound many drivers associate with straight-sixes.

The downsides: length, height and crankshaft twist

The inline-6 is not perfect for every car:

  • Length. Six cylinders in a row makes a long engine. It usually has to be mounted lengthwise (longitudinally), which suits rear-wheel-drive and many all-wheel-drive cars but makes it hard to fit sideways in a typical front-wheel-drive engine bay. Volvo is one of the few makers that has mounted inline-sixes transversely.
  • Height. An inline engine stands taller than a V engine of similar size, which can affect bonnet height. Chrysler’s “Slant Six” tilted the engine to one side to lower it.
  • Crankshaft twist. A long crankshaft can twist slightly as each cylinder fires, causing torsional vibration. Inline-6 engines use a harmonic damper on the front of the crankshaft to control it.
  • Crash structure. A long engine leaves less room in front of the cabin for crumple zones in some vehicle designs.

Inline-6 vs V6

Inline-6 V6
Cylinder banks One row of six Two banks of three
Cylinder heads One Two
Natural balance Excellent, no balance shaft needed Good, but depends on bank angle; some need balance shafts or special crank designs
Engine shape Long and narrow Short and wide
Typical mounting Longitudinal Transverse or longitudinal
Parts count Fewer (one head, simpler valvetrain) More (two heads, more camshafts)
Turbo packaging One exhaust manifold suits a single turbo Often uses two turbos, one per bank

A V6 is a good engine in its own right. It just reaches its compact size by trading away some of the inline-6’s natural balance and simplicity.

Why the inline-6 faded and why it came back

From the 1980s onward, front-wheel drive spread across mainstream cars. Because most front-wheel-drive cars mount the engine sideways, the compact V6 became the usual six-cylinder choice, and many inline-6s were dropped. American trucks also largely moved to V6 and V8 engines.

Several things have helped the inline-6 return:

  • Modular engine families. Some manufacturers build three-, four- and six-cylinder engines from the same basic cylinder design, often around 500 cc per cylinder. A six is then essentially a four with two more cylinders, which saves development and production cost. BMW’s modular gasoline engines are a well-known example.
  • Turbocharging. A turbocharged inline-6 can replace a larger V8 while keeping a single exhaust manifold and turbo layout.
  • Longitudinal platforms. Luxury and performance cars, SUVs and pickups built on rear-drive-based platforms have room for a long engine.
  • Electrification. Some makers pair inline-6s with mild-hybrid systems built into the transmission.

Recent examples include Mercedes-Benz’s modern straight-sixes, Mazda’s 3.3-litre gasoline and diesel inline-6s in its larger SUVs, and Stellantis’s Hurricane twin-turbo inline-6, which has replaced V8s in some of its vehicles.

Well-known inline-6 engines

Some of the best-known straight-sixes include:

  • BMW straight-sixes, used across many generations of 3, 5 and 7 Series cars and M models
  • Toyota 2JZ, especially the turbocharged version in the fourth-generation Supra
  • Nissan RB series, including the RB26 in the Skyline GT-R
  • Jaguar XK, the engine behind many classic Jaguars
  • Ford 300 (4.9-litre), a durable truck engine used for decades in F-Series pickups
  • Jeep/AMC 4.0-litre, used in the Cherokee and Wrangler
  • Cummins diesels, inline-6 diesels used in heavy-duty Ram pickups
  • GM’s 3.0-litre Duramax diesel, an inline-6 used in Chevrolet and GMC trucks and SUVs

Inline-6 diesels are also very common in heavy trucks and equipment, partly because the layout’s balance and simplicity suit long working lives.

Inline-6 questions

Is a higher-litre engine better?

Not automatically. A larger displacement engine can burn more air and fuel, so it has more power potential, but it often uses more fuel too. Modern turbocharged engines can make more power than much larger naturally aspirated ones. What matters more is whether the engine suits the vehicle and how you use it: towing and heavy loads favour more torque, while commuting favours efficiency.

Should you buy a four- or six-cylinder car?

It depends on your priorities. A four-cylinder usually costs less to buy and run, while a six generally offers smoother, stronger power for towing and highway driving. Our comparison of 4-cylinder and V6 engines walks through the trade-offs, and most of them apply to inline-sixes too.

How much power can a Ford 300 inline-6 handle?

The Ford 300 is popular with truck and hot-rod builders because it is known for being tough, but its factory output was modest. How much extra power one can safely take depends heavily on the specific engine’s condition and the parts used, such as the pistons, connecting rods, head, fuelling and whether it is turbocharged. There is no single reliable figure. Anyone planning a build should get advice from an engine builder familiar with that engine.

Is there a seven-cylinder engine?

Yes, though not in production cars. Inline-7s are used in some ships and tractors, and seven-cylinder radials were common in vintage aircraft. See our answer to whether a 7-cylinder engine exists.

The complete guide to engine types

Types of Car Engines: Layouts, Cylinder Arrangements and Placement
Read the guide

Keep exploring

Guides from other topics

All topics →