Start here
Engine Specs Explained: How to Read Engine Names and Numbers
Learn to read an engine spec sheet: displacement, cylinder layout, DOHC and 16V, turbo, hp vs bhp vs PS, torque, compression ratio and engine codes.
Engine Designs and Specs
Displacement, torque, horsepower, compression ratio, bore and stroke, redline and efficiency in plain terms.
Start here
Learn to read an engine spec sheet: displacement, cylinder layout, DOHC and 16V, turbo, hp vs bhp vs PS, torque, compression ratio and engine codes.
What bore and stroke mean, how oversquare, square and undersquare engines differ, why stroke limits rpm through piston speed, and why long stroke doesn't mean more torque.
What an engine's compression ratio means, how to calculate it, why higher ratios improve efficiency, how knock and octane limit them, and typical gas and diesel figures.
What engine capacity means, how displacement is calculated from bore and stroke, how cc, liters and cubic inches convert, and what engine size does and doesn't tell you.
Thermal, mechanical and volumetric engine efficiency explained, with formulas, worked examples, BSFC, the Otto and Diesel cycles, and why no engine can reach 100%.
200 Nm (about 148 lb-ft) is reasonable for a small or compact car but modest for a large SUV. How weight, gearing and the torque curve change the answer.
350 cubic inches is about 5.7 liters, so the size is the same. But not every 5.7 L engine is a Chevy 350. Here's how the LS1, HEMI and others differ.
How engine torque and horsepower relate: torque units and conversions, why hp uses 5252, the brake power formula, BMEP, and how to read gasoline and diesel power curves.
An engine's redline is set by its weakest high-rpm limit: piston speed, valve float, rod and bearing loads, or breathing. Why diesels redline low and how rev limiters work.
In Lycoming O-320, the O means horizontally opposed and 320 is displacement in cubic inches. Here's how to decode prefixes like IO, TIO, LIO and AEIO.
Related topics