Start here
How to Diagnose Engine Problems: Symptoms, Causes and Fixes
A step-by-step method for diagnosing engine problems: reading symptoms and codes, checking fluids, narrowing down the system, and deciding what to fix first.
Problems and Reliability
Symptoms, causes and checks for misfires, knocking, overheating, oil burning, no-start and other faults.
Start here
A step-by-step method for diagnosing engine problems: reading symptoms and codes, checking fluids, narrowing down the system, and deciding what to fix first.
Blown head gasket symptoms, from white smoke and coolant loss to bubbles and misfires, plus how to confirm one with combustion leak, pressure and compression tests.
Yes, you can run a basic car diagnostic yourself with an OBD-II scanner. Learn how to read and interpret codes, use live data, and know when to see a professional.
Troubleshoot lawnmower and small engine problems step by step: no-starts, surging, running only on choke, power loss and smoke, plus Tecumseh-specific tips.
A step-by-step checklist for an engine that cranks but won't start: security lights, fuel pump, fuses, spark, fuel pressure, flooding and timing belt failure.
Why an engine pulses, surges or revs high at idle, why RPM rises and falls while driving, and how to tell an idle fault from a slipping transmission.
How to tell rod knock from detonation, lifter tick and piston slap by sound, timing and location, plus what causes each and when to stop driving.
What causes an engine misfire, what P0300 to P0308 codes mean, and how to find the misfiring cylinder with coil swaps, plug checks and compression tests.
What an engine overhaul involves, step by step, from teardown and machining to reassembly and break-in, plus how a top-end overhaul differs and what affects cost.
Why car engines overheat, what to do when the temperature gauge climbs, and how to narrow down the cause, from low coolant and thermostats to fans and head gaskets.
Common exhaust system defects, from manifold leaks and failed flex pipes to clogged catalytic converters, with warning signs, safety risks and how to check.
How to check for engine sludge: what to look for under the oil cap and valve cover, warning signs like low oil pressure, common causes, and safe ways to remove it.
How to tell a bad thermostat from a failing water pump: compare warm-up behavior, leaks, noises and pulley play, and test both safely before replacing parts.
What causes low oil pressure, from low oil and wrong viscosity to worn pumps and bearings, what the warning light means, and when you must stop driving.
Signs of a bad or dirty throttle body: unstable idle, hesitation, stalling, limp mode and throttle codes, plus how to tell dirt from electronic failure.
The most common carburetor problems, including clogged jets, flooding, air leaks, choke and accelerator pump faults, with the symptoms each causes and how to fix them.
Why metal can show up in drained oil but not the filter: fine particles, bypass valves, pan settling and drain plug threads, plus how to check whether it's serious.
Why engines burn oil: worn rings, valve seals, PCV faults and turbo seals, how to tell burning from leaking, how to measure consumption, and what fixes exist.
How to recognize a worn engine: oil use, blow-by, low compression and noises, plus what cylinder wear patterns reveal and how dirt ingestion damages engines.
Related topics