Engine Types

Is there a 7 cylinder engine?

Yes. Seven-cylinder engines power ships, tractors and vintage radial aircraft, but almost never cars. Here's where they're used and why carmakers avoid them.

On this page
  1. The short answer
  2. Inline-7 engines: ships and tractors
  3. Seven-cylinder radial aircraft engines
  4. Why cars don’t use seven cylinders
  5. Odd cylinder counts that cars do use
  6. Other unusual cylinder counts

The short answer

Yes, seven-cylinder engines exist, but no mainstream production car has used one. You will find them in large ships, some agricultural machinery and many vintage aircraft. In the air, seven-cylinder radial engines were actually common, because radials work best with an odd number of cylinders.

Carmakers avoid seven cylinders not because it is impossible, but because it brings little benefit over a six or an eight and does not fit the way car engines are designed and built.

Inline-7 engines: ships and tractors

Inline-7 engines, with seven cylinders in a single row, are mostly found in heavy-duty diesel applications:

  • Large marine diesels. Big ship engines are often built from a modular design in which each cylinder has its own cylinder head. Manufacturers offer the same design in a range of cylinder counts, so a customer can choose the number of cylinders that gives the power they need. Seven-cylinder versions exist in ranges such as the Wärtsilä-Sulzer RTA96-C, one of the largest reciprocating engines ever built, and the Wärtsilä 32.
  • Submarines. Some diesel-electric submarines of the 1930s and 1940s used seven-cylinder diesels.
  • Tractors. AGCO Power (formerly Sisu Diesel) developed a 9.8-litre inline-7 diesel for large agricultural tractors, sharing many components with its six-cylinder engine.

These engines mostly run at steady speeds under heavy, constant load, where smoothness at all engine speeds is less important than having the right amount of power from a proven set of parts.

Seven-cylinder radial aircraft engines

Seven-cylinder engines were common in aircraft during the first half of the 20th century, in radial form. A radial arranges its cylinders in a circle around the crankshaft, like the spokes of a wheel.

A four-stroke radial fires every other cylinder as the crankshaft turns, so each cylinder fires once over two revolutions. With an odd number of cylinders, this pattern works through every cylinder in an even rhythm: for a seven, the order is 1-3-5-7-2-4-6. With an even number, it would not. That is why single-row radials almost always have five, seven or nine cylinders, and why many two-row radials have 14 or 18.

Seven-cylinder radials were widely used in light aircraft and trainers, and some are still made for vintage-style and homebuilt aircraft. Our article on how radial and rotary aircraft engines work explains the design in detail.

Why cars don’t use seven cylinders

Firing interval and balance

An inline-7 can fire perfectly evenly: in a four-stroke engine, the seven power strokes are spread over two crankshaft revolutions (720 degrees), so one arrives roughly every 103 degrees. That is fine.

The difficulty is balance. Like inline-threes and inline-fives, an inline-7 has its crank throws arranged in a way that is not symmetrical front to back. The up-and-down forces from the pistons can be made to largely cancel, but the engine is left with a rocking motion, called a rocking couple, as the front and rear halves of the engine are out of step. That can be managed with counterweights, balance shafts and engine mounts, but it adds weight, cost and complexity.

An inline-6, by contrast, is naturally free of these forces because its front and rear halves mirror each other. See our guide to inline-6 engines for why.

Length and crankshaft twist

Seven cylinders in a row make a very long engine, longer than an inline-6 that is already difficult to package. A long crankshaft also twists more under the pulses of each cylinder firing, which needs careful damping. A V layout would reduce the length, but a V7 would have unequal banks of three and four cylinders, which is awkward to balance and to build.

Engine families and cost

Carmakers usually design engines in families that share parts and tooling. A manufacturer might build three-, four- and six-cylinder engines from the same basic cylinder design, or a V6 and a V8 that share components. A seven-cylinder engine would fit poorly into these families and would need its own crankshaft, block, head, camshafts and exhaust, all for a small number of sales.

Little to gain

A seven offers little that a six or an eight cannot already provide. If a carmaker needs more power than a six, it can turbocharge the six, use a hybrid system or move to a V8. The extra smoothness or power of a seventh cylinder rarely justifies the engineering effort.

Odd cylinder counts that cars do use

An odd number of cylinders is not a problem on its own. Many cars use:

The seven is simply squeezed out by the six and the eight on both sides.

Other unusual cylinder counts

Engines with large or unusual cylinder counts tend to show up in the same places as the inline-7: ships, generators, aircraft and heavy industry. For the extreme end of the scale, see our answer to whether there is a V24 engine. For a broader view of which cylinder counts appear in cars and why, see our guide to the types of car engines.

The complete guide to engine types

Types of Car Engines: Layouts, Cylinder Arrangements and Placement
Read the guide

Keep exploring

Guides from other topics

All topics →