Engine Reliability

What are the top 10 most reliable engines ever made?

The top 10 most reliable engines ever made, from the Toyota 22R and Jeep 4.0 to the GM LS and Cummins 5.9: why they last and the weak spots each still has.

On this page
  1. How We Judged “Reliable”
  2. The 10 Most Reliable Engines Ever Made
  3. Quick Comparison
  4. What These Engines Have in Common
  5. Honorable Mentions
  6. Does a Reliable Engine Guarantee a Reliable Car?

There’s no official ranking, but ten engines show up on almost every list of the most reliable ever made: the Toyota 22R/22RE, Toyota 1UZ-FE V8, Toyota 2JZ inline-six, Honda K-series, GM LS V8, GM 3800 V6, Jeep 4.0 inline-six, Ford 300 inline-six, Mercedes-Benz OM617 diesel and Cummins 5.9 12-valve diesel. All of them have a long record of reaching very high mileage with ordinary maintenance.

Below is what makes each one durable, along with the weak spot each still has, because even the best engines have one.

How We Judged “Reliable”

“Reliable” here means an engine that:

  • regularly reaches high mileage without major internal repairs,
  • tolerates less-than-perfect maintenance better than most,
  • has no widespread design flaw that commonly destroys the engine, and
  • built that reputation over a long production run and a large number of vehicles.

Raw power and refinement don’t count. Several of these engines are slow, noisy or thirsty by modern standards.

The 10 Most Reliable Engines Ever Made

1. Toyota 22R / 22RE (2.4L Inline-Four)

Used in: Toyota pickups, 4Runner and Celica, from the early 1980s to the mid-1990s.

The 22R combines an iron block, a single overhead cam and modest power. It works well below its limits, and high-mileage examples are common in old Toyota trucks. The fuel-injected 22RE is the more common version today.

Weak spot: the timing chain guides. Early versions used plastic guides that could break, letting the chain slap against the timing cover. Replacing the chain and guides at high mileage is routine maintenance on these engines.

2. Toyota 1UZ-FE (4.0L V8)

Used in: the original Lexus LS 400 and other Lexus and Toyota models from 1989.

Toyota built the 1UZ-FE to an unusually high standard for its flagship Lexus. Its all-aluminum, DOHC, 32-valve design was smooth and lightly stressed. Examples with very high mileage and few internal repairs are often reported.

Weak spot: the timing belt and water pump need replacing on schedule, and age-related oil leaks are common on older examples.

3. Toyota 2JZ (3.0L Inline-Six)

Used in: the Toyota Supra (Mk4), Lexus IS 300 and GS 300, and others, in the 1990s and 2000s.

The 2JZ is most famous for the twin-turbo 2JZ-GTE’s ability to handle huge power increases. That same over-engineering makes the naturally aspirated 2JZ-GE very durable in everyday use. It has an iron block, a strong bottom end and a smooth inline-six layout.

Weak spot: the timing belt needs regular replacement, and age-related leaks and sensor failures are common on older cars.

4. Honda K-Series (2.0L and 2.4L Inline-Four)

Used in: the Civic, Accord, CR-V, Integra/RSX, Element and many others, from the early 2000s.

The K20 and K24 combine Honda’s i-VTEC valvetrain with a timing chain and a well-proven design. They’re popular with tuners and long-distance commuters alike, and high-mileage examples are common.

Weak spot: some engines develop exhaust camshaft lobe wear or timing chain tensioner rattle, and valve clearances need periodic adjustment.

5. GM LS V8 (Gen III and Gen IV)

Used in: the Corvette, Camaro, Silverado/Sierra, Tahoe, and many more, from 1997.

The LS family kept a simple pushrod layout but added modern features like a deep-skirt block, six-bolt main caps on many versions and strong oiling. Truck versions (like the iron-block 4.8 and 5.3) are known for passing high mileage in fleet and personal use.

Weak spot: later engines with Active Fuel Management (cylinder deactivation) are prone to lifter failure. We cover that in what GM engines to stay away from.

6. GM 3800 V6 (Buick 3.8L)

Used in: a long list of Buick, Pontiac, Oldsmobile and Chevrolet sedans and minivans, from the late 1980s to the late 2000s.

The 3800 is a pushrod V6 with an iron block and heads and a long, steady development history. It’s not exciting, but owners commonly report trouble-free service well past 200,000 miles.

Weak spot: plastic upper intake manifolds and lower intake gaskets on some Series II engines can leak coolant. They’re fixable, but you shouldn’t ignore them.

7. Jeep 4.0L Inline-Six (AMC 242)

Used in: the Jeep Cherokee (XJ), Wrangler and Grand Cherokee, from 1987 to 2006.

An iron long-stroke inline-six with a simple pushrod valvetrain, the 4.0 makes strong low-end torque and has a well-earned reputation for durability, even in hard off-road use.

Weak spot: some cylinder heads from around 2000 to 2003 (often called the “0331” head) were prone to cracking. Rear main seal and oil leaks are also common with age.

8. Ford 300 / 4.9L Inline-Six

Used in: Ford F-Series pickups and vans, from 1965 to 1996.

The Ford 300 is a long-stroke truck engine with an iron block and head and gear-driven camshaft timing, so there’s no belt or chain to stretch or break. It makes its torque low in the rev range and was used heavily in work trucks and even industrial equipment.

Weak spot: performance and fuel economy are modest, and old carbureted examples can be fussy. Mechanically, very little goes wrong.

9. Mercedes-Benz OM617 (3.0L Five-Cylinder Diesel)

Used in: the Mercedes-Benz 240D/300D/300SD family (W123, W116, W126 and others), from the mid-1970s to the early 1990s.

The OM617 has a massive iron block and head, mechanical fuel injection and a relaxed power output. It’s legendary for reaching extreme mileage in taxi and personal service.

Weak spot: the vacuum systems and the injection pump need care with age, and the engine is very slow by modern standards.

10. Cummins 5.9L 12-Valve (6BT)

Used in: Dodge Ram pickups from 1989 to 1998, plus a wide range of commercial applications.

Derived from a commercial engine, the 12-valve Cummins has an iron block and head, gear-driven timing, two valves per cylinder and a mechanical injection pump. Very little electronics means very little goes wrong. See our guide to the most reliable diesel truck engines for the full diesel picture.

Weak spot: the “killer dowel pin,” a small dowel in the timing gear housing that can work loose and fall into the gears. Fixing it before it happens is cheap.

Quick Comparison

Engine Layout Fuel Timing drive Known weak spot
Toyota 22R/22RE Inline-4 Gas Chain Chain guides
Toyota 1UZ-FE V8 Gas Belt Belt and water pump service
Toyota 2JZ Inline-6 Gas Belt Belt service, age-related leaks
Honda K-series Inline-4 Gas Chain Cam wear, tensioner rattle
GM LS (Gen III/IV) V8 Gas Chain AFM lifters on later engines
GM 3800 V6 Gas Chain Intake gaskets (Series II)
Jeep 4.0 Inline-6 Gas Chain Cracked heads (around 2000–2003)
Ford 300 Inline-6 Gas Gears Few; old fuel systems
Mercedes OM617 Inline-5 Diesel Chain Vacuum system, pump age
Cummins 5.9 12-valve Inline-6 Diesel Gears Killer dowel pin

What These Engines Have in Common

Almost every engine on this list shares several traits:

  • Low stress. They make modest power for their size, so their parts work well below their limits.
  • Strong materials. Most have cast-iron blocks, and several have iron heads too.
  • Simple valvetrains. Pushrods or a single cam, with less to go wrong.
  • Durable timing drives. Gears or chains on most, rather than belts. The two Toyota belt engines are the exception, and their belts are a planned maintenance item rather than a weakness.
  • Long production runs. Years of refinement fixed early problems.
  • Few add-on systems. Little or no direct injection, turbocharging or complex emissions hardware in their most reliable forms.

That contrast explains a lot about the least reliable engines of all time, which often pushed new technology into production before it was ready.

Honorable Mentions

Other engines often named alongside the top ten include the Volvo “redblock” B230 four-cylinder, Ford’s 7.3 Power Stroke diesel, Toyota’s 2GR-FE V6 and UR-series V8s, the Honda B-series, and BMW’s M57 diesel inline-six.

Does a Reliable Engine Guarantee a Reliable Car?

No. A 25-year-old 22RE or Jeep 4.0 is only as good as its maintenance history, and the transmission, cooling system and electrics age too. Treat a famous engine as a good starting point, then check the specific vehicle: service records, oil condition, leaks, and how it sounds at cold start.

The complete guide to engine reliability

The Least Reliable Engines of All Time
Read the guide

Keep exploring

Guides from other topics

All topics →