Engine Specs

What does the o mean in lycoming o 320?

In Lycoming O-320, the O means horizontally opposed and 320 is displacement in cubic inches. Here's how to decode prefixes like IO, TIO, LIO and AEIO.

On this page
  1. What “opposed” means
  2. What the 320 means
  3. Common Lycoming prefix letters
  4. What the suffix after the second dash means
  5. Decoding real examples
  6. Other manufacturers and layouts
  7. Where to confirm an exact engine model

The “O” in Lycoming O-320 stands for “opposed”, meaning a horizontally opposed engine with cylinders lying flat on either side of the crankshaft. The 320 is the engine’s displacement in cubic inches, about 5.2 liters. So an O-320 is a horizontally opposed engine of roughly 320 cubic inches. In its case that’s a four-cylinder, air-cooled engine, rated in common versions at about 150–160 horsepower.

The O-320 is one of the most widely used light-aircraft engines. It’s found in many versions of the Cessna 172 and the Piper Cherokee family, among others.

What “opposed” means

In a horizontally opposed engine, the cylinders are arranged in two flat banks facing each other across the crankshaft, with pistons moving in and out in opposite directions. Car enthusiasts know the layout as a “flat” or “boxer” engine. For aircraft it has several practical advantages:

  • Low, flat profile, which fits neatly behind a propeller and keeps the nose slim
  • Good natural balance, because opposing pistons cancel much of each other’s shaking force
  • Simple air cooling, since each cylinder sits in the airflow

Most current piston engines in light aircraft from Lycoming and Continental are horizontally opposed, which is why so many of their model names start with or contain “O”. Our guide to reading engine specs covers the equivalent layout codes for car engines (I4, V6, H4 and so on).

What the 320 means

The number is displacement in cubic inches, rounded. The O-320 has a 5.125-inch bore and a 3.875-inch stroke across four cylinders:

0.7854 × 5.125² × 3.875 × 4 ≈ 319.8 cubic inches

Lycoming names its other engines the same way: O-235, O-360, O-540 and so on. To convert to liters, divide by about 61, so 320 cubic inches is about 5.2 L. Our engine displacement guide has a full conversion table.

Common Lycoming prefix letters

Letters added before the “O” describe other features. These are the ones you’ll see most often in Lycoming designations:

Letter Meaning
O Opposed (horizontally opposed cylinders)
I Fuel injected (no letter usually means carbureted)
T Turbocharged
S Supercharged
G Geared (reduction gearbox between crank and propeller)
L Left-hand rotation (turns the opposite way to standard, used to counter-rotate on some twins)
A / AE Aerobatic (with oil and fuel systems designed for inverted or aerobatic flight)
H Helicopter
V Vertical (crankshaft vertical, for some helicopter installations)

Letters combine. An IO-360 is a fuel-injected opposed 360. A TIO-540 is turbocharged, fuel-injected and opposed, at 540 cubic inches. An LIO-320 is a left-hand-rotating, fuel-injected O-320. An AEIO-360 is an aerobatic, fuel-injected opposed 360.

What the suffix after the second dash means

A full Lycoming model name usually adds a suffix, as in O-320-E2D or IO-360-A1A. The suffix identifies the exact model variant. Broadly, Lycoming uses it to encode the power section and rating (which can reflect things like compression ratio and horsepower), the crankshaft nose section, and the accessory section. Some models add a further digit for details such as crankshaft counterweighting.

Two engines with the same base name, such as two O-320s, can therefore differ in power rating, compression ratio, fuel requirements, propeller mounting and accessories. If you need to know exactly what a suffix means for a specific engine, check Lycoming’s documentation, such as the operator’s manual, type certificate data sheet or parts catalog for that model.

Decoding real examples

  • O-320-E2D: opposed, about 320 cubic inches, carbureted, with the specific E2D configuration. This is a common version in light trainers.
  • IO-360: fuel-injected, opposed, about 360 cubic inches.
  • TIO-540: turbocharged, fuel-injected, opposed, about 540 cubic inches, and a six-cylinder.
  • LIO-320: left-hand rotation, fuel-injected, opposed, about 320 cubic inches.
  • AEIO-360: aerobatic, fuel-injected, opposed, about 360 cubic inches.

Other manufacturers and layouts

Continental, the other major US maker of light-aircraft piston engines, uses a similar scheme: O-200, O-470, IO-550, TSIO-520 and so on. The letters before the displacement describe induction and configuration, with T signaling turbocharging.

The letters go back to older US engine designation practice, where a letter described the cylinder layout and a number gave the displacement in cubic inches. Under that system:

  • R = radial (e.g., Pratt & Whitney R-1830)
  • O = opposed
  • V = V-type (e.g., Allison V-1710)
  • L = inline

That’s why a big wartime radial and a modern trainer engine are named the same way: layout letter, then cubic inches.

Where to confirm an exact engine model

For an engine installed in a particular aircraft, the authoritative sources are:

  • The engine data plate on the engine itself
  • The engine logbook
  • Lycoming’s type certificate data sheet and operator’s manual for that model
  • The aircraft’s type certificate data sheet, which lists approved engines

These matter for airworthiness, fuel grade, parts and maintenance. For those purposes, always rely on the official documents, not general guides like this one.

The complete guide to engine specs

Engine Specs Explained: How to Read Engine Names and Numbers
Read the guide

Keep exploring

Guides from other topics

All topics →